重庆理工大学学报(自然科学) ›› 2023, Vol. 37 ›› Issue (7): 129-134.

• “精密工程测量技术与仪器”专栏 • 上一篇    下一篇

动载体卫通天线的扰动观测及补偿设计

刘 昕,秦 超   

  1. (1.中国电子科技集团公司第五十四研究所,石家庄 050081; 2.哈尔滨工程大学 智能科学与工程学院,哈尔滨 150001)
  • 出版日期:2023-08-15 发布日期:2023-08-15
  • 作者简介:刘昕,男,硕士,高级工程师,主要从事卫星通信、伺服控制和惯性导航研究,Email:qc_article@163.com。

Disturbance observation and compensation design of SOTM antenna

  • Online:2023-08-15 Published:2023-08-15

摘要: 动载体卫通天线技术的难点在于抑制由载体运动所引起的对天线指向精度的扰 动,补偿扰动可以显著提高天线的动态性能。传统控制方法通过部署速率陀螺实现扰动角速度 的测量,难以准确获取天线转动轴上的扰动量,仅以一定的比例补偿到速度环路输入,提升效果 有限。提出了一种基于状态观测器的扰动补偿方法,通过采集天线在典型路面正常工作时惯导 的角速度,利用成型滤波器对扰动谱进行近似,获取扰动模型。设计了扰动观测器模型,估计扰 动角速度,并以车载动中通天线为平台进行测试。测试结果表明:相比于传统扰动前馈补偿,提 出的方法在角误差峰值上减小了 13%,RMS减小了 43%,可以更好地适应跟踪路况。

关键词: 动中通天线, 扰动模型, 路谱分析, 状态观测器, 前馈补偿

Abstract: The difficulty of SOTM antenna is to suppress the disturbance of antenna pointing accuracy caused by carrier movement. Compensation for disturbance can significantly improve the dynamic performance of antenna. The traditional control method realizes the measurement of the disturbance angular velocity with a rate gyro, and it’s difficult to accurately obtain the disturbance on the antenna rotation axis. In this way, limited improvement effect occurs, as only a certain proportion is compensated into the speed loop input. Therefore, this paper proposes a disturbance compensation method based on a state observer. A disturbance model is obtained by collecting the angular velocity of the inertial navigation system when the antenna is working normally on a typical road surface, and approximating the disturbance spectrum by using a shaped filter. A disturbance observer model is designed to estimate the angular velocity of the disturbance, and the test is carried out on the vehicle-mounted mobile antenna. The test results show that, compared with the traditional disturbance feedforward compensation, the proposed method reduces the angular error peak by 13% and RMS by 43%, which can better adapt to the tracking road conditions.

中图分类号: 

  • TP273